Heavy-duty drawers are a great way to add extra storage space to your home. They can be used in the kitchen, bathroom, or even the garage. However, before you can use them, you need to install them. Here are some of the best techniques to use when installing heavy-duty drawers.
Using Lumbers
Lumbers are sturdy, and they can support the weight of the drawers. You can either use 2x4s or 4x4s. If you are using 2x4s, you need to cut them into pieces that are 4 feet long. If you are using 4x4s, you need to cut them into pieces 8 feet long.
To install using lumbers, start by measuring the space where you want to install the drawers. Then, cut the lumbers to size and screw them into the wall. Ensure the screws are long enough to go through the lumbers and into the wall studs. You should also use washers on the screws to prevent them from pulling out.
Once the lumbers are in place, you can install the heavy-duty drawers. Start by attaching the heavy duty drawer slider to the lumbers. Make sure that the drawer slides are level and even. Then, attach the drawer fronts to the drawer slides. You can use screws or brackets to do this. Finally, add the handles or pulls to the drawer fronts.
Using Drywall Anchors
You can use drywall anchors if you install heavy-duty drawers in a room that doesn’t have lumbers. Drywall anchors are small plastic or metal devices that expand when you screw them into the wall. This helps to hold the screws in place and prevents them from pulling out.
Drywall anchors are your best bet if:
- You’re installing the heavy-duty drawer in a room that doesn’t have lumbers, such as a bathroom,
- You’re worried about the lumbers splitting the drywall,
- The wall is made of something other than drywall, such as plaster.
To install drywall anchors, measure the installation space. Then, mark the location of the drywall anchors on the wall. Using a drill, make pilot holes at the marks. Be careful not to drill through the wall.
Next, insert the drywall anchors into the pilot holes. Tighten the anchors using a screwdriver until they are flush with the wall. Then, attach the drawer slides to the anchors. Make sure that the drawer slides are level and even. Finally, attach the drawer fronts to the drawer slides. You can use screws or brackets to do this.
Using a Wall Cabinet
You can use a wall cabinet if you want to install heavy-duty drawers but don’t want to drill into the wall. Wall cabinets are great because they provide extra storage space and manage to support the drawers’ weight.
To install using a wall cabinet, measure the space in which the drawers will be installed. Cut the cabinet to size if necessary. Then, use screws or brackets to attach the cabinet to the wall. Start by attaching the drawer slides to the cabinet. Make sure that the drawer slides are level and even. Then, attach the drawer fronts to the drawer slides. Finally, add the handles or pulls to the drawer fronts.
Using a Metal Track
Metal tracks are great because they provide extra support and can be used to support the weight of the drawers. Also, metal tracks are less likely to pull out from the wall. However, when using a metal track, it’s essential to use one that is made specifically for heavy-duty drawers. These tracks are usually made of steel or aluminum.
To install using a metal track, measure the installation space. Next, use a drill to make pilot holes at the marks. Be careful not to drill through the wall. Next, insert the metal track into the pilot holes. Use screws to secure the track to the wall. Start by attaching the drawer slides to the track. Once the drawer slides are in place, you can attach the drawer fronts.
The Bottom Line
Installing heavy-duty drawers doesn’t have to be difficult. By following these simple tips, you can ensure that your heavy-duty drawers are installed securely and safely. Choose the installation method that is best for your needs and the space where you’ll be installing the heavy-duty drawers. Then, with the right tools, you can install heavy-duty drawers like a pro.
